Flashforge 3D Printers: Adventurer 5M and AD5X Compared (2026)
Flashforge makes fast, simple printers at entry-level prices. Its Adventurer 5M and AD5X are two of the cheapest CoreXY printers on Amazon.com. Here are the 2 models we have checked and how they differ.
* Affiliate link. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you. We have not tested these printers ourselves: the information comes from the manufacturer and Amazon.com.
Key takeaways
- Adventurer 5M ($249): a fast CoreXY printer with fully automatic leveling, single color.
- AD5X ($349): the same idea with four-color printing built in.
- Both have an open frame: fine for PLA and PETG; Flashforge recommends an enclosure for ABS and ASA.
Flashforge at a glance
Flashforge is a Chinese manufacturer founded in 2011 that makes printers for consumers, education and professionals. Its current ranges are the Adventurer (consumer) and the Creator (more advanced).
For software, Flashforge offers Orca-Flashforge, based on OrcaSlicer, its older FlashPrint software and a mobile app to monitor prints.
Flashforge printers on Amazon.com
| Model | Type | Build volume | Enclosed | Multicolor | Price* | Amazon |
|---|---|---|---|---|---|---|
| Flashforge Adventurer 5M | Filament | 220 × 220 × 220 mm (8.7 × 8.7 × 8.7 in) | – | No | $249 | View* |
| Flashforge AD5X | Filament | 220 × 220 × 220 mm (8.7 × 8.7 × 8.7 in) | – | Included | $349 | View* |
* Prices checked on Amazon.com. Build volume according to the manufacturer.
Which Flashforge printer should you buy?
Fast CoreXY at an entry price
Flashforge Adventurer 5M
A CoreXY printer with up to 600 mm/s (manufacturer), fully automatic leveling and a quick-detach 280 °C nozzle you can swap without tools. The 220 × 220 × 220 mm build volume covers most beginner projects. Flashforge advertises quiet operation.
View on Amazon*Cheap multicolor
Flashforge AD5X
A compact CoreXY printer that feeds up to four spools without a large external unit, with 1-click auto leveling, a 300 °C direct drive extruder and a 220 × 220 × 220 mm build volume. One of the cheapest ways into multicolor printing.
View on Amazon*Strengths and limits of Flashforge
- Strengths: low prices for fast CoreXY printers, easy setup, compact multicolor with the AD5X.
- Limits: smaller build volumes than some competitors, open frames on the cheapest models, a smaller community than Creality or Bambu Lab.
FAQ
Adventurer 5M or AD5X?
The Adventurer 5M if you only print in one color and want the lowest price. The AD5X if you want four-color prints: it costs more but includes the color system.
Is the Flashforge Adventurer 5M good for beginners?
Based on its specifications, yes: fully automatic leveling, a tool-free nozzle swap and fast CoreXY motion at an entry-level price.